T8 4ft LED Tube/Bulb - 18W 2520 Lumens 5000K Clear, G13 Base, Single End Power - Ballast Bypass Fluorescent Replacement
4FT LED Tube Light 18W Natural White 5000K, Clear Cover, Single-Ended Power, 4 FT LED Bulbs
In LEDMyplace our 4ft LED tube of 18W is available in 5000K color temperature and having a CRI of >80 can deliver lumens up to 2520. This single-ended power led tube is an excellent substitute for T8, T10 & T12 fluorescent tubes. It can safely and easily replace the fluorescent tubes up to 65W and bring an energy-savings of 47W. Thus, you can lower your utility bill every month. Our 18W single-ended tube will work without a ballast, hence the existing ballast must be bypassed and directly wired to the line source for the tube fixture to work. These LED tubes are housed in rugged die-cast aluminum for efficient heat dissipation. To get the standard ceiling height, these LED tubes having a beam angle of 120 degrees emit enough bright light, have a long lifespan. One of the best things about our LED Tubes from LEDMyplace is they are ETL & DLC listed, these listings make you eligible for a rebate.
Features of T8 4ft 18W LED Tube 5000K Clear 2520 Lumens Single Ended Power
- Available Wattage: 18W
- Color Temperature: 5000K
- Luminous Efficacy: 130-140 Lm/W
- Wattage Equivalent: 65W
- Lifespan - 50,000 hours
- Ballast Bypass [Works without a ballast]
- Voltage: 100V - 277V
- ETL, DLC approved
- 5 years of Manufacturer's Warranty
This LED tube requires you to either remove the ballast or bypass it. We have prepared a step-by-step guide to help you bypass the ballast to successfully install your LED tube.
Whether it’s a 2ft, 4ft or 8ft LED tube, one of the jaw-dropping features of LED tubes is that they don’t flicker unlike what you would have definitely observed in case of fluorescent tubes. The LED tubes start instantly and once they start, they don’t flicker and produce a humming sound.
The LED tubes that are either clear or frosted have an IP22 rating. This rating signifies that our LED tubes are protected against dust-tight (objects in the dust that are of a size more than 1mm) and protected against water-ingress from all directions. For such reasons, LED tubes are safe for use in areas where there are moisture and water. E.g. Bathrooms, kitchens, etc.
The LED tubes accept an input voltage of 100V-277V. You can go for a waterproof transformer in case you don’t have this voltage and wish to convert this voltage range to some other.
Low Maintenance Cost
The LED tubes will require low or no maintenance if you are going for a ballast bypass option of LED tube installation. Though not very frequent, you may have to replace the ballasts once in the total lifetime of LED tubes, if you are going for the ballast compatibility option and hence you will have to bear with slightly higher maintenance costs when choosing the former option.
>50,000 Life Hours
The lifespan of LED tubes is no less than 50,000 hours or 5.7 years if the tubes are operated upon for 24 hours a day. Can last longer, if the tubes are kept ON for only 12 hours a day.
The CRI is greater than 80 for LED tubes, whatever object comes in the light distribution range appears to be real and natural up to 80% extent on a CRI scale of 1-100 and as it would have appeared in the natural light.
120 Degree Beam Angle
The 120 degree or ultra-wide beam angle is made use of when large areas need to be covered. All our LED tubes whether clear or frosted have a 120 -degree beam angle
The LED tubes can save energy up to 75% in extreme contrast with fluorescent tubes that consume lot of energy to bring you a higher energy bill. We highly recommend going for our LED tubes that are an excellent combo of lumen brightness and energy-savings.
Aluminium Heat Sink
The LED tubes have a big heat sink made of aluminum and that’s a pretty good reason as to why the LED tubes don’t warm up too soon to be inconsistent operation. This is in extreme contrast with the fluorescent tubes that warmed up too soon and required cooling down to operate efficiently.
Embedded inside the LED tube is a high-quality standalone chip -- SMD LED -- made from many numbers of chips to ensure high performance and reliability.
The LED tubes were one of the first LED lighting products to have become rebate eligible. All our LED tubes are DLC approved to make you eligible for a rebate.
|Color Rendering Index(CRI):||80 CRI|
|Dimensions (L x W x H):||47.75 x 1.15 x 1.32|
|IP Rating:||IP22 Rated|
|Life Hours:||50,000 Hours|
|Operating Temprature:||-68 To +122 °F|
|Replaces:||65 Watt Replacement|
|Beam Angle:||120° Beam Angle|
|Certifications:||ETL, DLC Listed|
|Color Temperature (Kelvin):||5000 Kelvin|
|Housing:||Aluminum + pc|
|Light Distribution:||130-140 Lm/W|
|MPN (Part No.):||TB046|
Questions & AnswersAsk a Question
Installation instructions are mentioned under the Product name as hyperlink.