T8 4ft LED Tube/Bulb - Glass 18W 1710 Lumens 5000K Frosted, Retrofit, G13 Base, Single Ended Power - Ballast Bypass Fluorescent Replacement
T8 4ft LED Tube/Bulb - Glass 18W 1710 Lumens 5000K Frosted, Retrofit, G13 Base, Single Ended Power - Ballast Bypass Fluorescent Replacement
15-Pack
- Regular price
- CAD 268.02
- Sale price
- CAD 131.33
4 FT Single Ended T8 LED Tubes, 18W, 5000K, Frosted Tubes, 4 FT LED Ballast Bypass Bulbs, 4 Foot LED Light Fixture
The 4ft LED Tube of 18W as Frosted glass tube is quite an energy-efficient lighting fixture when compared with standard T8, T10 or T12 fluorescent tubes. With an ultra-wide beam angle of 220°, the light beam can cover huge spaces and provide for general purpose lighting. This product allows for bypassing of the ballast to eliminate any extra power consumption. The product does not require any complex wiring and is thus easy to install. Bypass the ballast before installing the tube Being UL listed, the product is safe for use. You have 3 years of hassle-free warranty on this product
1800
Lumens
>30,000
Hours
>220°
Beam Angle
18
Watt
Features of T8 4ft 18W LED Tube Glass 5000K Frosted Single Ended power
- Wattage: 18Watt
- Lumens: 1710
- Color Temperature: 5000K
- Type: Glass
- Trim: Frosted
- Size: 4ft
- CRI: ≥80
- Beam Angle: 220°
- Dimmable: No
- Ballast Bypass
- cULus Listed
- Warranty: 3 years
- Use Non Shunted tomb stones With This Tube
Ballast Bypass
This LED tube requires you to either remove the ballast or bypass it. We have prepared a step-by-step guide to help you bypass the ballast to successfully install your LED tube.
Flicker Free
Whether it’s 2ft, 4ft or 8ft LED tube, one of the jaw-dropping features of LED tubes is that they don’t flicker unlike what you would have definitely observed in case of fluorescent tubes. The LED tubes start instantly and once they start, they don’t flicker and produce a humming sound.
Voltage Input
The LED tubes accept an input voltage of 120V-277V. You can go for a waterproof transformer in case you don’t have this voltage and wish to convert this voltage range to some other.
Low Maintenance Cost
The LED tubes will require low or no maintenance if you are going for a ballast bypass option of LED tube installation. Though not very frequent, you may have to replace the ballasts once in the total lifetime of LED tubes, if you are going for ballast compatibility option and hence you will have to bear with slightly higher maintenance costs when choosing the former option.
>50,000 Life Hours
The lifespan of LED tubes is no less than 50,000 hours or 5.7 years if the tubes are operated upon for 24 hours a day. Can last longer, if the tubes are kept ON for only 12 hours a day.
CRI >80
The CRI is greater than 80 for LED tubes, whatever object comes in the light distribution range appears to be real and natural up to 80% extent on a CRI scale of 1-100 and as it would have appeared in the natural light.
220 Degree Beam Angle
All our LED tubes which come in glass have a 220-degree beam angle. This beam angle is used for very huge spaces and wider areas. Designed especially for applications where need a wide lighting area.L06G-V long lifetime and low lumen depreciation reducing the maintenance costs due to L06G-V slim aluminum form, optical and driver integrated.
Energy Saving
The LED tubes can save energy up to 75% in extreme contrast with fluorescent tubes that consume a lot of energy to bring you a higher energy bill. We highly recommend going for our LED tubes that are an excellent combo of lumen brightness and energy-savings.
Aluminium Heat Sink
The LED tubes have a big heat sink made of aluminum and that’s a pretty good reason as to why the LED tubes don’t warm up too soon to be inconsistent operation. This is in extreme contrast with the fluorescent tubes that warmed up too soon and required cooling down to operate efficiently.
Rebate Eligible
The LED tubes were one of the first LED lighting products to have become rebate eligible. All our LED tubes are DLC approved to make you eligible for a rebate.
LED Chip
Embedded inside the LED tube is a high-quality standalone chip -- SMD LED -- made from many numbers of chips to ensure high performance and reliability.
Specifications
| Base Type: | G13 |
| Brand: | LEDMyplace |
| CCT: | 5000 Kelvin |
| Color Rendering Index(CRI): | >80 CRI |
| Dimensions (L x W x H): | 47.76*1.02*1.02 |
| IP Rating: | IP20 Rated |
| Life Hours: | >30,000 Hours |
| MPN (Part No.): | TB003 |
| SKU: | WEN-T8GB1218M-50-A |
| Voltage: | 120-277 Volt |
| Wattage: | 18 Watt |
| Operating Temperature: | -4 Degree F To +113 Degree F |
| Beam Angle: | >220° Beam Angle |
| Brightness: | 1800 Lumens |
| Certifications: | UL, RoHS Listed |
| Color Temperature (Kelvin): | 5000 Kelvin |
| Housing: | Glass |
| LED Type: | SMD LEDs |
| Lumens: | 1800 Lumens |
| Replaces Fluorescent : | 50 Watt |
| UPC: | 719034340203 |
| Warranty: | 3 Years |
| Weight: | 0.2 lbs |
Product Review
Questions & Answers
Ask a Question-
Is this Light required ballast thank you
No, this light must be used with the ballast removed, and with hot and neutral wires on one side only with a non-shunted tombstone. The other end does not get wired, and acts like a placeholder in the fixture.
-
how do you Ballast-bypass?
You basically cut the wires to either side of the ballast wired to it from the light. The diagram for our Single-ended tube installation is below at the clickable link ;
Whole Wiring Sheet
Ballast Instructions Link -
I only need 6bulbs how can l get 6
The minimum quantity is a pack of 15.
You may also be interested in
-
CAD 268.02 CAD 131.33
