8ft LED Tube Light - 40W - 5000K -T8 Frosted - 5600 Lumens - FA8 Base Single Pin

8ft LED Tube Light - 40W - Replace fluorescent 140W - 5000K Color Temperature -T8 Clean Glass - 5600 Lumens - FA8 Base Single Pin Power
Our Double-Ended Power 8ft LED tube of 40W is available at 5000K color temperature. This LED Tube having a CRI of >80 and it can deliver lumens up to 5600. This frosted tube is an excellent substitute for T8, T10 & T12 fluorescent tubes. Our LED Tube can safely and easily replace a fluorescent tube of 140W and bring an energy-savings of 100W. Thus, a lower utility bill for you every month. Because this 40W LED tube is double-ended-power, it will work without a ballast. Hence the existing ballast must be bypassed and directly wired to the line source for the tube fixture to work. These 40W LED tubes are housed by rugged die-cast aluminum for efficient heat dissipation. To emit illumination from the high standard ceiling, these 8 foot LED tubes having a beam angle of 120 degrees, releasing enough bright light. This light has a long lifespan and has a shatterproof coating. LED Tubes from LEDMyplace is ETL & DLC listed and these listings make you eligible for a handsome rebate along with 5 years of warranty.

Feature of 8ft LED Tube 40W 5600 Lumens Single Pin 5000K Frosted
- Available Wattage: 40 Watt
- Color Temperature Available: 5000K
- Luminous Efficacy: 130-140 Lm/W
- Wattage Equivalent: 140W
- Lifespan: 50,000 hours
- Voltage: 100V - 277V
- Trim: Frosted
- Ballast Bypass [Works without a ballast]
- ETL, DLC Listed
- 5 years of Manufacturer's Warranty
Ballast Bypass
This LED tube requires you to either remove the ballast or bypass it. We have prepared a step-by-step guide to help you bypass the ballast to successfully install your LED tube.

Flicker Free
Whether it’s a 2ft, 4ft or 8ft LED tube, one of the jaw-dropping features of LED tubes is that they don’t flicker unlike what you would have definitely observed in the case of fluorescent tubes. The LED tubes start instantly and once they start, they don’t flicker and produce a humming sound.

IP22 Rated
Both types of LED tubes in LEDMypace are either clear or frosted have an IP22 rating. This rating signifies that our LED tubes are protected against dust-tight (objects in the dust that are of a size more than 1mm) and protected against water-ingress from all directions. For such reasons, LED tubes are safe for use in areas where there are moisture and water. E.g. Bathrooms, kitchens, etc.

Voltage Input
The LED tubes accept an input voltage of 100V-277V. You can go for a waterproof transformer in case you don’t have this voltage and wish to convert this voltage range to some other.


Low Maintenance Cost
The LED tubes accept an input voltage of 100V-277V. You can go for a waterproof transformer in case you don’t have this voltage and wish to convert this voltage range to some other.

>50,000 Life Hours
The LED tubes accept an input voltage of 120V-277V. You can go for a waterproof transformer in case you don’t have this voltage and wish to convert this voltage range to some other.

CRI >80
The LED tubes accept an input voltage of 120V-277V. You can go for a waterproof transformer in case you don’t have this voltage and wish to convert this voltage range to some other.


120 Degree Beam Angle
The 120 degrees or ultra-wide beam angle is made use of when large areas need to be covered. All our LED tubes whether clear or frosted have a 100-degree beam angle.

Energy Saving
The 120 degrees or ultra-wide beam angle is made use of when large areas need to be covered. All our LED tubes whether clear or frosted have a 120-degree beam angle.


Aluminium Heat Sink
The 120 degrees or ultra-wide beam angle is made use of when large areas need to be covered. All our LED tubes whether clear or frosted have a 120-degree beam angle.

LED Chip
Embedded inside the LED tube is a high-quality standalone chip -- SMD LED -- made from many numbers chips to ensure high performance and reliability.

Specifications
Base Type: | FA8 |
Brand: | LEDMyplace |
Color Rendering Index(CRI): | >80 CRI |
Dimensions (L x W x H): | 93.81 x 1.15 x 1.32 |
DLC Listed: | Yes |
LED Type: | 2835 |
Light Distribution: | 130-140 Lm/W |
MPN (Part No.): | TB018 |
Power Factor: | >0.9 |
SKU: | WEN-8FT-40W-FA8-5000K-F |
Warranty: | 5 Years |
Beam Angle: | 120° Beam Angle |
Certifications: | ETL, DLC, CE, RoHS |
Color Temperature (Kelvin): | 5000 Kelvin |
Dimmable: | No |
IP Rating: | IP22 Rated |
Life Hours: | 50,000 Hours |
Lumens: | 5600 Lumens |
Operating Temprature: | -68 To +122 °F |
Replaces: | 140 Watt Replacement |
Voltage: | 100-277 Volt |
Wattage: | 40 Watt |
Product Review
Questions & Answers
Have a Question?
Be the first to ask a question about this.