T8 LED Tube Light fixture - 40 Watts - Replace 140W Fluorescent Tube - 6500K - 5600 lumens - Single Pin FA8 Base - Clear Cover - 8FT LED Bulbs
LED Tubes in a single pin at LEDMyplace is available in 8ft LED Tubes are considered the brightest because of their ability to deliver a higher lumen output to serve larger and wider places. These 40W LED tubes are more energy-efficient than what you get with the other sizes. Our 8ft LED tubes are available in 40W. The 40W tube LED lights can deliver up to 5600 lumens. These LED Tubes having a beam angle of more than 180 degrees. Our 8ft LED tube has a 3-4 times longer lifespan than traditional fluorescent tubes so considering the longest lifespan of any fluorescent tube is 15,000 hours. There I no need for ballast for This 8ft LED tube or ballast must be bypassed as an option. Our 8ft LED tube is designed to work smoothly and for as long as the tube lasts with an excellent heat dissipation system. These 40W 8ft LED tubes can easily replace 140W of any fluorescent tube and you get 75% of energy-savings when making a switch.
This light is ETL-listed, which means it comes in Canada with high on safety. You have also a completely risk-free 5 years of warranty from the manufacturer’s end.
Features of T8 8ft 40W LED Tube Light 5600 Lumens Single Pin 6500K Clear
- Available Wattage: 40W
- Color Temperature: 6500K
- Luminous Efficacy: 130-140 Lm/W
- Beam Angle: 180 degree
- Wattage Equivalent: 140W
- Lifespan - 50,000 hours
- Ballast Bypass [Works without a ballast]
- Voltage: 100V - 277V
- ETL, CE & ROHS Approved
- 5 years of Manufacturer's Warranty
This LED tube requires you to either remove the ballast or bypass it. We have prepared a step-by-step guide to help you bypass the ballast to successfully install your LED tube.
8ft LED tube, one of the jaw-dropping features of LED tubes is that they don’t flicker unlike what you would have definitely observed in the case of fluorescent tubes. The LED tubes start instantly and once they start, they don’t flicker and produce a humming sound.
The LED tubes that are either clear have an IP22 rating. This rating signifies that our LED tubes are protected against dust-tight (objects in the dust that are of a size more than 1mm) and protected against water-ingress from all directions. For such reasons, LED tubes are safe for use in areas where there are moisture. E.g. Bathrooms, kitchens, etc.
Embedded inside the LED tube is a high-quality standalone chip - SMD LED - made from any number of chips to ensure high performance and reliability.
The LED tubes accept an input voltage of 100V-277V. You can go for a waterproof transformer in case you don’t have this voltage and wish to convert this voltage range to some other.
Low Maintenance Cost
The LED tubes will require low or no maintenance if you are going for a ballast bypass option of LED tube installation. Though not very frequent, you may have to bypass the ballasts once in the total lifetime of LED tubes.
>50,000 Life Hours
The lifespan of LED tubes is no less than 50,000 hours or 5 years if the tubes are operated upon for 24 hours a day.
The CRI is greater than 80 for LED tubes, whatever object comes in the light distribution range appears to be real and natural up to 80% extent on a CRI scale of 1-100 and as it would have appeared in the natural light.
180 Degree Beam Angle
The 180 degrees or ultra-wide beam angle is made use of when large areas need to be covered. All our LED tubes whether clear or frosted have a 180 -degree beam angle.
The LED tubes can save energy up to 75% in extreme contrast with fluorescent tubes that consume a lot of energy to bring you a higher energy bill. We highly recommend going for our LED tubes that are an excellent combo of lumen brightness and energy-savings.
Aluminium Heat Sink
The LED tubes have a big heat sink made of aluminum and that’s a pretty good reason as to why the LED tubes don’t warm up too soon to be inconsistent operation. This is in extreme contrast with the fluorescent tubes that warmed up too soon and required cooling down to operate efficiently.
|Color Rendering Index(CRI):||>80 CRI|
|Dimensions (L x W x H):||93.81 x 1.15 x 1.32|
|IP Rating:||IP22 Rated|
|Life Hours:||50,000 Hours|
|MPN (Part No.):||TB055|
|Replaces:||140 Watt Replacement|
|Beam Angle:||180° Beam Angle|
|Color Temperature (Kelvin):||6500 kelvin|
|Housing:||Aluminum + PC|
|Operating Temprature:||-68 To +122 °F|
Questions & Answers
Have a Question?
Be the first to ask a question about this.