T8 4ft LED Tube/Bulb - 18W 2520 Lumens 5000K Frosted, G13 Base, Single End Power - Ballast Bypass Fluorescent Replacement
T8 4ft LED Tube, 2520 Lumens, 18 Watt, 65W Equivalent, 5000 Kelvin, IP44 Rated, Frosted, Single-Ended Power, DLC Listed
Choose our Linear-shaped LED Tube Lights in 4ft which have 18W and available in 5000K color temperature. This led tube produces up to CRI of >80 and delivers lumens up to 2520. It is an excellent substitute for T8, T10 & T12 fluorescent tubes. This 18W can safely and easily replace a fluorescent tube of 65W and bring an energy-savings of 47W. Thus, a lower utility bill for you every month. These Single-Ended Power 18W led tubes will work without a ballast, hence the existing ballast must be bypassed and directly wired to the line source for the tube fixture to work. Our Frosted 18W LED tubes are housed in rugged die-cast aluminum for efficient heat dissipation. To illuminate from ceiling height, our LED tubes having a beam angle of 120 degrees to emit enough bright light. Our LED tubes have a long lifespan and have a shatterproof coating. LED Tube from LEDMyPlace is they are ETL & DLC listed when these listings make you eligible for a handsome rebate along with 5 years of warranty.
Features T8 LED Bulbs 5000K Daylight White 4ft 18W Frosted 2520 Lumens Single Ended Power:
- Available Wattage: 18W
- Color Temperature: 5000K
- Luminous Efficacy: 130-140 Lm/W
- Beam Angle: 120 degree
- Wattage Equivalent: 65W
- Lifespan - 50,000 hours
- Ballast Bypass [Works without a ballast]
- Voltage: 100V - 277V
- ETL, DLC approved
- 5 years of Manufacturer's Warranty
This LED tube requires you to either remove the ballast or bypass it. We have prepared a step-by-step guide to help you bypass the ballast to successfully install your LED tube.
Whether it’s a 2ft, 4ft or 8ft LED tube, one of the jaw-dropping features of LED tubes is that they don’t flicker unlike what you would have definitely observed in the case of fluorescent tubes. The LED tubes start instantly and once they start, they don’t flicker and produce a humming sound.
The LED tubes that are frosted have an IP22 rating. This rating signifies that our LED tubes are protected against dust-tight (objects in the dust that are of a size more than 1mm) and protected against water-ingress from all directions. For such reasons, LED tubes are safe for use in areas where there are moisture. E.g. Bathrooms, kitchens, etc.
The LED tubes accept an input voltage of 100V-277V. You can go for a waterproof transformer in case you don’t have this voltage and wish to convert this voltage range to some other.
Low Maintenance Cost
LED tubes will require lower maintenance if you are going for a ballast bypass option of LED tube installation. Though not very frequent, you may have to replace the ballasts once in the total lifetime of LED tubes.
>50,000 Life Hours
The lifespan of LED tubes is no less than 50,000 hours or 5 years if the tubes are operated upon for 24 hours a day.
The CRI is greater than 80 for LED tubes, whatever object comes in the light distribution range appears to be real and natural up to 80% extent on a CRI scale of 1-100 and as it would have appeared in the natural light.
120 Degree Beam Angle
All our LED tubes that come in a 120-degree beam angle. This beam angle is used for very huge spaces and wider areas. Designed especially for applications where need a wide lighting area. long lifetime and low lumen depreciation reducing the maintenance costs due to slim aluminum form, optical and driver integrated.
The LED tubes can save energy up to 75% in extreme contrast with fluorescent tubes that consume lot of energy to bring you a higher energy bill. We highly recommend going for our LED tubes that are an excellent combo of lumen brightness and energy-savings.
Aluminium Heat Sink
The LED tubes have a big heat sink made of aluminium and that’s a pretty good reason as to why the LED tubes don’t warm up too soon to be in consistent operation. This is in extreme contrast with the fluorescent tubes that warmed up too soon and required cooling down to operate efficiently.
Embedded inside the LED tube is a high-quality standalone chip -- SMD LED -- made from any chips to ensure high performance and reliability.
The LED tubes were one of the first LED lighting products to have become rebate eligible. All our LED tubes are DLC approved to make you eligible for a rebate.
|Color Rendering Index(CRI):||>80 CRI|
|Dimensions (L x W x H):||47.75 x 1.15 x 1.32|
|IP Rating:||IP22 Rated|
|Life Hours:||50,000 Hours|
|Beam Angle:||120° Beam Angle|
|Certifications:||ETL, DLC Listed|
|Color Temperature (Kelvin):||5000 Kelvin|
|Housing:||Aluminum + pc|
|Light Distribution:||130-140 Lm/W|
|MPN (Part No.):||TB038|
|Replaces:||65 Watt Replacement|
Questions & AnswersAsk a Question
is this a glass tube I am looking for plastic tubes
No, this version is a poly-carbonate and aluminum tube (plastic/aluminum housing.)
Are these bulbs dimmable?
Unfortunately, none of our tubes are currently dimmable.
Do I need non shunted tombstone ends
Yes. You have to bypass the ballast, redo the wiring and bring hot and neutral connections at same end, and change the tombstone socket on this end from shunted to non-shunted.