T8 4ft LED Tube/Bulb - 18W 2520 Lumens 4000K Frosted, Retrofit, G13 Base, Single End Power - Ballast Bypass Fluorescent Replacement

T8 4ft LED Tube, 18 Watt, 2520 Lumens, 65 Watt Replacement, 4000 Kelvin, Frosted, Single-Ended Power, DLC Listed
Our Single-Ended Power 4ft LED tube of 18W is available at 4000K color temperature. This LED Tube having a CRI of >80 and it can deliver lumens up to 2520. This frosted tube is an excellent substitute for T8, T10 & T12 fluorescent tubes. Our LED Tube can safely and easily replace a fluorescent tube of 65W and bring an energy-savings of 47W. Thus, a lower utility bill for you every month. Because this 18W LED tube is single-ended-power, it will work without a ballast. Hence the existing ballast must be bypassed and directly wired to the line source for the tube fixture to work. These 18W LED tubes are housed by rugged die-cast aluminum for efficient heat dissipation. To emit illumination from the high standard ceiling, these LED tubes having a beam angle of 180 degrees, releasing enough bright light. This light has a long lifespan and has a shatterproof coating. LED Tubes from LEDMyPlace are ETL & DLC listed and these listings make you eligible for a handsome rebate along with 5 years of warranty.

Features of T8 4ft LED Tube Light
- Available Wattage: 18W
- Color Temperature: 4000K
- Luminous Efficacy: 130-140 Lm/W
- Beam Angle: 180 degree
- Wattage Equivalent: 65W
- Lifespan - 50,000 hours
- Ballast Bypass [Works without a ballast]
- Voltage: 100V - 277V
- ETL, DLC approved
- 5 years of Manufacturer's Warranty
Ballast Bypass
This LED tube requires you to either remove the ballast or bypass it. We have prepared a step-by-step guide to help you bypass the ballast to successfully install your LED tube.

Flickr Free
Whether it’s a 2ft, 4ft or 8ft LED tube, one of the jaw-dropping features of LED tubes is that they don’t flicker unlike what you would have definitely observed in the case of fluorescent tubes. The LED tubes start instantly and once they start, they don’t flicker and produce a humming sound.

IP22 Rated
The LED tubes that are frosted have an IP22 rating. This rating signifies that our LED tubes are protected against dust-tight (objects in the dust that are of size more than 1mm) and protected against water-ingress from all directions. For such reasons, LED tubes are safe for use in areas where there is moisture. E.g. Bathrooms, kitchens etc.

Voltage Input
The LED tubes accept an input voltage of 100V-277V. You can go for a waterproof transformer in case you don’t have this voltage and wish to convert this voltage range to some other.


Low Maintenance Cost
The LED tubes will require low or no maintenance if you are going for a ballast bypass option of LED tube installation. Though not very frequent, you may have to replace the ballasts once in the total lifetime of LED tubes, if you are going for ballast compatibility option and hence you will have to bear with slightly higher maintenance costs when choosing the former option.

>50,000 Life Hours
The lifespan of LED tubes is no less than 50,000 hours or 5 years if the tubes are operated upon for 24 hours a day.

CRI >80
The CRI is greater than 80 for LED tubes, whatever object comes in the light distribution range appears to be real and natural up to 80% extent on a CRI scale of 1-100 and as it would have appeared in the natural light.


180 Degree Beam Angle
The 180 degree or ultra-wide beam angle is made use of when large areas need to be covered. All our LED tubes whether clear or frosted have a 180 -degree beam angle.

Energy Saving
The LED tubes can save energy up to 75% in extreme contrast with fluorescent tubes that consume a lot of energy to bring you a higher energy bill. We highly recommend going for our LED tubes that are an excellent combo of lumen brightness and energy-savings.


Aluminium Heat Sink
The LED tubes have a big heat sink made of aluminum and that’s a pretty good reason as to why the LED tubes don’t warm up too soon to be inconsistent operation. This is in extreme contrast with the fluorescent tubes that warmed up too soon and required cooling down to operate efficiently.

LED Chip
Embedded inside the LED tube is a high-quality standalone chip - SMD LED - made from many chips to ensure high performance and reliability.

Rebate Eligible
The LED tubes were one of the first LED lighting products to have become rebate eligible. All our LED tubes are DLC approved to make you eligible for a rebate.

Specifications
Base Type: | G13 |
Brand: | LEDMyplace |
Color Rendering Index(CRI): | 80 CRI |
Dimensions (L x W x H): | 47.75 x 1.15 x 1.32 |
DLC Listed: | Yes |
IP Rating: | IP22 Rated |
Life Hours: | 50,000 Hours |
Lumens: | 2520 Lumens |
Operating Temprature: | -68 To +122 °F |
Replaces: | 65 Watt Replacement |
Voltage: | 100-277 Volt |
Wattage: | 18 Watt |
Beam Angle: | 180° Beam Angle |
Certifications: | ETL, DLC Listed |
Color Temperature (Kelvin): | 4000 Kelvin |
Dimmable: | No |
Housing: | Aluminum + pc |
LED Type: | 2835 |
Light Distribution: | 130-140 Lm/W |
MPN (Part No.): | TB042 |
Power Factor: | 0.95 |
SKU: | WEN-T8-4FT-18WF(4000K) |
Warranty: | 5 Years |
Weight: | 0.66 Lbs |
Product Review
Questions & Answers
Ask a Question-
do these bulbs come with a non-shunted tombstone for installation?
No, the non shunted tombstones doesn't comes as a part of package but you can purchase those as a separate item from our website.