T8 4ft LED Tube/Bulb - 22W 3080 Lumens 6500K Clear, Retrofit, Single End Power - Ballast Bypass Fluorescent Replacement

View Installation Instruction

T8 4ft LED Tube/Bulb - 22W 3080 Lumens 6500K Clear, Retrofit, Single End Power - Ballast Bypass Fluorescent Replacement

View Installation Instruction

MPN: TB022
Quantity must be 1 or more
Regular Price:
Regular price
CAD 20,445.00
Sale price
CAD 13.63
Save CAD 20,431.37 (31.85%)
  • 30 Days Return
  • 5 Years Warranty
Sold only by the Case of 1.

T8 4ft LED Tube/Bulb - 22W 3080 Lumens 6500K Clear, Retrofit, Single End Power - Ballast Bypass Fluorescent Replacement
Regular price
Sold out
Sale price
CAD 13.63

T8 4 FT Single-End Powered LED Tubes, 22W, 6500K, 3080 Lumens, 4ft LED Bulbs Clear No Ballast

LEDMyplace brings 4 feet LED clear tube with 22W. These LED Tubes are available in 6500K color temperature and having a CRI of >80 which can deliver 3080 lumens. Our single-ended power led tubes are an excellent substitute for a 4ft LED tube. Tube LED with 22W can safely and easily replace a fluorescent tube of 80W and bring an energy-savings of 58W. Thus, you can have a lower utility bill. Our 22W can work without a ballast, hence the existing ballast must be bypassed. It will directly be wired to the line source for the existing tube fixture to work. These Single Ended LED tubes are housed in rugged die-cast aluminum to heat dissipation. These LED Tubes having a beam angle of >120 degrees emit enough bright light For the standard ceiling height. Our tubes have a long lifespan and a shatterproof coating. LED tubes from LEDMyPlace are ETL listed. These tubes are 5 years of warranty. 

Watt Replacement
Degree Beam Angle

Features of T8 4ft 22W LED Tube 6500K Clear 3080 Lumens Single Ended Power:

  • Available Wattage: 22W
  • Color Temperature: 6500K
  • Luminous Efficacy: 130-140 Lm/W
  • Beam Angle: 120 degree
  • Wattage Equivalent: 80W
  • Lifespan - 50,000 hours
  • Ballast Bypass [Works without a ballast]
  • Voltage: 100V - 277V
  • ETL approved
  • 5 years of Manufacturer's Warranty

Ballast Bypass

This LED tube requires you to either remove the ballast or bypass it. We have prepared a step-by-step guide to help you bypass the ballast to successfully install your LED tube.


LED Ballast compatible tube lights provide flicker-free illumination till the end of their lifespan. With instant functionality, these lights lose very little energy during start-up ensuring durability.

IP22 Rated

The LED tubes that are either clear have an IP22 rating. This rating signifies that our LED tubes are protected against dust-tight (objects in the dust that are of a size more than 1mm) and protected against water-ingress from all directions. For such reasons, LED tubes are safe for use in areas where there are moisture. E.g. Bathrooms, kitchens, etc. 

Voltage Input

These LED Plastic Tubes are designed to function and withstand an input voltage of 100V-277V. A waterproof transformer can be used to use these LED tube lights with some other voltage range.

Low Maintenance Cost

These Ballast Bypass LED Tubes require low or no maintenance. The only cost you may have to incur is bypassing the ballasts once in the total lifetime of LED tubes.

>50,000 Life Hours

The lifespan of LED tubes is no less than 50,000 hours or 5 years if the tubes are operated upon for 24 hours a day.

CRI >80

The CRI is greater than 80 for LED tubes, whatever object comes in the light distribution range appears to be real and natural up to 80% extent on a CRI scale of 1-100 and as it would have appeared in the natural light.

120 Degree Beam Angle

These lights are designed to give a Wide Beam Angle of about 120 degrees giving broader illumination.

Energy Saving

The LED tubes can save energy up to 75% in extreme contrast with fluorescent tubes that consume a lot of energy to bring you a higher energy bill. We highly recommend going for our LED tubes that are an excellent combo of lumen brightness and energy-savings.

Aluminium Heat Sink

The LED tubes have a big heat sink made of aluminum and that’s a pretty good reason as to why the LED tubes don’t warm up too soon to be inconsistent operation. This is in extreme contrast with the fluorescent tubes that warmed up too soon and required cooling down to operate efficiently.   

Aluminium Heat Sink

LED Chip

Embedded inside the LED tube is a high-quality standalone chip -- SMD LED -- made from a number of chips to ensure high performance and reliability.

LED Chip


Base Type: G13
Brand: LEDMyplace
Color Rendering Index(CRI): >80 CRI
Dimensions (L x W x H): 47.75 x 1.15 x 1.32
DLC Listed: No
IP Rating: IP22 Rated
Life Hours: 50,000 Hours
Lumens: 3080 Lumens
Operating Temprature: -68 To +122 °F
Replaces: 80 Watt Replacement
Voltage: 100-277 Volt
Wattage: 22 Watt
Beam Angle: 120 Degree Beam Angle
Certifications: ETL Listed
Color Temperature (Kelvin): 6500 Kelvin
Dimmable: No
Housing: Aluminum + pc
LED Type: 2835
Light Distribution: 130-140 Lm/W
MPN (Part No.): TB022
Power Factor: 0.95
SKU: WEN-T8-4FT-22WC6500K
Warranty: 5 Years

Product Review

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question

You may also be interested in

Recently Viewed Items