T8 4ft LED Tube/Bulb - 22W 3080 Lumens 5000K Clear, Single End Power - Ballast Bypass Fluorescent Replacement
T8 4ft LED Tube/Bulb - 22W 3080 Lumens 5000K Clear, Single End Power - Ballast Bypass Fluorescent Replacement
1pc
- Regular price
- Sold out
- Sale price
- CAD 13.63
4FT T8 LED Bulb No Ballast, 22W, 3080 Lumens, 5000K, Single-End Powered Clear Tubes
LEDMyplace brings 4 feet LED clear tube with 22W. These LED Tubes are available in 5000K color temperature and having a CRI of >80 which can deliver 3080 lumens. Our single-ended power led tubes are an excellent substitute for a 4ft fluorescent tube. Tube LED with 22W can safely and easily replace a fluorescent tube of 80W and bring an energy-savings of 58W. Thus, you can have a lower utility bill. Our 22W can work without a ballast, hence the existing ballast must be bypassed. It will directly be wired to the line source for the existing tube fixture to work. These Single Ended LED tubes are housed in rugged die-cast aluminum to heat dissipation. These LED Tubes having a beam angle of 120 degrees emit enough bright light For the standard ceiling height. Our tubes have a long lifespan and a shatterproof coating. LED tubes from LEDMyPlace are ETL & DLC listed. These listings make you eligible for a rebate along with 5 years of warranty.
80
Watt Replacement
3080
Lumens
50,000
Hours
120
Degree Beam Angle
100-277
Volt
Features of T8 4 foot LED Light Fixture 22W 3080 Lumens 5000K Clear Single Ended Power
- Available Wattage: 22 Watt
- Color Temperature: 5000K
- Luminous Efficacy: 130-140 Lm/W
- Beam Angle: 120 degree
- Wattage Equivalent: 80W
- Lifespan - 50,000 hours
- Ballast Bypass [Works without a ballast]
- Voltage: 100V - 277V
- ETL, DLC approved
- 5 years of Manufacturer's Warranty
Ballast Bypass
These LED tube light fixtures work without ballast (or bypass ballast). Understand the step-by-step procedure of removing or bypassing a ballast by reading our guide.
Flicker-Free
LED tube lights provide flicker-free illumination till the end of their lifespan. With instant functionality, these lights lose very little energy during start-up ensuring durability.
IP22 Rated
The LED tubes that are either clear have an IP22 rating. This rating signifies that our LED tubes are protected against dust-tight (objects in the dust that are of a size more than 1mm) and protected against water-ingress from all directions. For such reasons, LED tubes are safe for use in areas where there are moisture. E.g. Bathrooms, kitchens, etc.
Voltage Input
The LED tubes accept an input voltage of 100V-277V. You can go for a waterproof transformer in case you don’t have this voltage and wish to convert this voltage range to some other
Low Maintenance Cost
The LED tubes will require low or no maintenance if you are going for a ballast bypass option of LED tube installation. Though not very frequent.
>50,000 Life Hours
The lifespan of LED tubes is no less than 50,000 hours or 5 years if the tubes are operated upon for 24 hours a day.
CRI >80
With a Color Rendering Index(CRI) > 80, these LED Tube Light Fixtures render the natural or real color of objects to an accuracy of 80% compared to the ideal source i.e. Sun(CRI=100).
120 Degree Beam Angle
These lights are designed to give a Wide Beam Angle of about 120 degrees giving broader illumination.
Energy Efficient
LED Light Fixtures can save you up to 75% on utility bills compared to HID’s. LED light fixtures to provide you with a brilliant combo of high lumens and low-energy consumption making them ideal for ceiling, storage areas, mechanic garages, and fabrication floors, etc.
Aluminium Heat Sink
The LED tubes have a big heat sink made of aluminum and that’s a pretty good reason as to why the LED tubes don’t warm up too soon to be inconsistent operation. This is in extreme contrast with the fluorescent tubes that warmed up too soon and required cooling down to operate efficiently.
LED Chip
Embedded inside the LED tube is a high-quality standalone chip -- SMD LED -- made from many chips to ensure high performance and reliability.
Rebate Eligible
The LED tubes were one of the first LED lighting products to have become rebate eligible. All our LED tubes are DLC approved to make you eligible for the rebate.
Specifications
| Base Type: | G13 |
| Brand: | LEDMyplace |
| Color Rendering Index(CRI): | 80 CRI |
| Dimensions (L x W x H): | 47.75 x 1.15 x 1.32 |
| DLC Listed: | Yes |
| IP Rating: | IP22 Rated |
| Life Hours: | 50,000 Hours |
| Lumens: | 3080 Lumens |
| Operating Temprature: | -68 To +122 °F |
| Replaces: | 80 Watt Replacement |
| Voltage: | 100-277 Volt |
| Wattage: | 22 Watt |
| Beam Angle: | 120 Degree Beam Angle |
| Certifications: | ETL, DLC Listed |
| Color Temperature (Kelvin): | 5000 Kelvin |
| Dimmable: | No |
| Housing: | Aluminum + pc |
| LED Type: | 2835 |
| Light Distribution: | 130-140 Lm/W |
| MPN (Part No.): | TB034 |
| Power Factor: | 0.95 |
| SKU: | WEN-T8-4FT-22WC(5000K) |
| Warranty: | 5 Years |
| Weight: | 0.66 Lbs |
Product Review
Questions & Answers
Ask a Question-
Can any of these single ended LED replacements be wired to a dimmer?
They can be, but make sure the dimmer is LED compatible.
-
Do these lights come with non-shunted tombstones, or do you need to buy these separately?
No, but they can be bought here ; https://ledmyplace.ca/products/non-shunted-tombstone-socket?_pos=1&_sid=de5bd0146&_ss=r
-
I am looking for bulbs to replace the ones i use at my walk in freezer please check if these works with the ones i have I can send the picture once you reply
You can go for our cooler tube CT001.
You may also be interested in
-
CAD 350.13 CAD 131.33
