T8 4ft 18W LED Tube Light; 5000K; Clear Glass; Single Ended power

View Installation Instruction

T8 4ft 18W LED Tube Light; 5000K; Clear Glass; Single Ended power

View Installation Instruction

MPN: TB009

15-Pack

30-Pack

Regular Price:

Sale price: CAD 108.93
Regular price: CAD 108.93

Free Shipping
30 Days Return
3 Years Warranty

Sold only by the Case of 1.

Quantity

T8 4ft 18W LED Tube Light; 5000K; Clear Glass; Single Ended power

15-Pack

Regular price: CAD 108.93
Sale price: CAD 108.93

Add to Cart

T8 LED Tube Light 4ft, 18W, 5000K, Clear Glass, 4 foot LED Bulbs No Ballast

The Ballast bypass LED tube comes in a clear tube and provides up to 1710 lumens of brightness. With a CCT of 5000K and a CRI >80 these LED tubes can deliver cool white light with ample brightness. It is an ideal replacement for older power-consuming T8, T10 & T12 fluorescent tubes. This 18W LED tube light fixture can safely and easily replace a fluorescent tube that consumes 65W. These 18W LED tubes are housed in rugged die-cast aluminum for efficient heat dissipation. For the standard ceiling height, these LED tubes have a beam angle of >220°, emit enough bright light, have a long lifespan of about 50,000 hours, and have a shatterproof coating, unlike the inferior quality fluorescent tubes. One of the best things about LED tubes from LEDMyPlace is they are UL & DLC listed making them safe and hazard-proof for domestic and commercial applications.

1710

Lumens

>50,000

Hours

>220°

Beam Angle

120-277

Volt

Features of T8 4ft 18W LED Tube Glass 5000K Clear Single Ended power

Available Wattage: 18W
Color Temperature: 5000K
Luminous Flux: 1710 lumens
Wattage Equivalent: 45W
Lifespan - 50,000 hours
Ballast Bypass [Works without a ballast]
Voltage: 120V - 277V
cULus,
3 years of Manufacturer's Warranty

features Specs.

Ballast Bypass:

These LED tube light fixtures work without ballast(or bypassed ballast). Understand the step-by-step procedure of removing or bypassing a ballast by reading our guide.

Flicker-Free:

LED tube lights provide flicker-free illumination till the end of their lifespan. With instant functionality, these lights lose very little energy during start-up ensuring durability.

IP44 Rated:

These LED Linear Tubes come with an IP44 rating ensuring protection against dust and water ingress. These tubes are safe to use for indoor lighting in bathrooms, kitchens, bedrooms, etc.

Voltage Input:

These LED Plastic Tubes are designed to function and withstand an input voltage of 100V-277V. A waterproof transformer can be used to use these LED tube lights with some other voltage range.

Low-Cost Maintenance:

These Ballast Bypass LED Tubes require low or no maintenance. With a bypassed ballast the cost of replacing the ballast is eliminated making these tubes extremely low maintenance and practical.

CRI>80:

With a Color Rendering Index(CRI) > 80, these LED Tube Light Fixtures render the natural or real color of objects to an accuracy of 80% compared to the ideal source i.e. Sun(CRI=100).

Wide Beam Angle:

These lights are designed to give a Wide Beam Angle of about 120 degrees giving broader illumination.

Energy Saving:

LED Light Fixtures can save you up to 75% on utility bills compared to HID’s. LED light fixture provides you with a brilliant combo of high lumens and low-energy consumption making them ideal for ceiling, storage areas, mechanic garages, and fabrication floors, etc.

Aluminum Heat Sink:

With an aluminum heat sink, these lights are built to resist heat while producing optimal lighting. Aluminum being a conductor, can easily and effectively dissipate heat in comparison to other materials.

LED Chips:

These LED lights are built with premium quality standalone chips(SMD LED) to provide high performance and reliability.

Rebate Eligible:

These LED light tubes are DLC approved, making you eligible for rebates and other incentives.

Specifications

Base Type:	G13
Brand:	LEDMyPlace
Color Rendering Index(CRI):	>80 CRI
Dimensions (L x W x H):	47.761.021.02
Fixture:	Yes
IP Rating:	IP20 Rated
Life Hours:	>50,000 Hours
MPN (Part No.):	TB009
Replaces Fluorescent :	65 W
UPC:	719034337043
Warranty:	3 Years
Weight:	0.2 lbs

Beam Angle:	>220° Beam Angle
Certifications:	UL
Color Temperature (Kelvin):	5000 Kelvin
Dimmable:	Non-dim
Housing:	Glass
LED Type:	SMD LEDs
Lumens:	1710 Lumens
Operating Temprature:	-4° F TO +113° F
SKU:	WEN-T8GB1218T-50-A.1pk
Voltage:	120-277 Volt
Wattage:	18 Watt

Product Review

Robert W.

Shipping was on time and all of the tubes are in great condition have 40 of 45 installed and seem to work fine very happy, thanks will see how they last. Bob

Peter E.

purchased 2 cases so far, installed 1 1/2 cases of them. Very impressed with how bright they are. Installed 6 tubes in a free-standing garage not heated, works no problem in the very cold temps.

David W.

Very impressed with the results of these tubes! And no more ballasts.

Jim C.

Photo of the new lights in my shop

robert h.

Up and running for a week now and working great. Way better than the standard fluorescent bulbs.

Renaud B.

Awesome, simple retro fit, cheap way to save tons.

Keith M.

They are great certainly easy to convert and install and a whole lot brighter and a lot less power consumption

joseph C.

Love it .

Robert S.

Very good service fast delivery

Nasir M.

Order 1 pack of 30 tubes, installed in fixtures after little rewiring and these are more brighter than flourecent. Almost 50% engery saving. Amazon, I will order more.

Terry K.

There is no comparison to the old fluorescent lighting. The leds are instant on bright clean lighting and 1/2 the power consumption. No need to remove the ballast just disconnect the ballast then cut and connect the wires directly to power tombstones at one end of the fixture. You can bypass /install the fixture in about 2 minutes. Very happy.

Phyllis J.

Easy to install, work great. I replaced 8 (4') fluorescent with 2 LED.

William A.

I am in the middle of converting our church building over to led tubes. The old fixtures have leaking ballasts and these direct connect tubes are a God sent answer to prayer. We have around 100 fixtures this is the best price I have found and the quality of the light has improved greatly in our building. The conversion takes only about 15 minutes per fixture.

Dennis T.

Great value, very bright much better than old lights. Will buy again.

Chad M.

Great lights will order again.

Chad M.

Great lights

Chad M.

Awsome lights will order again.

Chad M.

Great lights.

Kevin O.

Half the electricity used,40w or 32w (fluorescent) verses the 18w (Led). No mercury vapour, remove the ballast, no buzzzzing, no flickering, instantly on, even in cold garage they work, just the brightest and happiest light. They’re a no brainer.

Gerald V.

I purchased the clear bulbs to finish an installation to convert florescent bulbs to LED. When installed, the clear glass bulbs from LEDMyplace were brighter than the frosted fixtures from another supplier. Therefore, I swapped the frosted bulbs with the clear in the places where I needed the most light. The quality of the bulbs are excellent and the price was the lowest around. Shipping was fast and the packaging was excellent.

Kevin O.

The bulbs installed easily. I got rid of old ballasts, old 40watt mercury vapour bulbs. Every time I turn on the lights I smirk because I instantly cut my power use by more than half. Yayyyy

Karl P.

These tubes exceeded our expectations. For some installations, we were able to go from 4 fluorescent tubes per fixture to 2 LED tubes, a double energy savings. From 160 watts down to 36 watts!

Chad M.

These lights are awsome they look great when installed properly.

William M.

Very fast service, excellent pricing, and no shipping damage on 2 separate orders. Highly recommend!

Glenn M.

Prompt delivery. Good quality. Very satisfied.

Dirk G.

Replaced the flourescent bulbs in my attached garage. What a BIG difference it made!!! Easy to convert fixture for these bulbs to work. The light from these bulbs are VERY bright!!!

Terry F.

I really like the bulbs, they are really bright. Not hard to install.

Chad M.

Nice lights will order again.

Goz G.

Love them. We have great modern look and feel with over 100 installed. Replaced old 8 ft bulbs and ballast with conversion kits off eBay and these bulbs for brighter, better light and no more ballast hum. Highly recommended.

Chad M.

Great lights will order again.

Chad M.

Nice light, only time will tell of the longevity of them, but so far so good. Put them in 3 days ago, and no one is complaining.

Andrew S.

Wanted to upgrade lights in garage, worked as expected, nice and bright for reasonable pricing. Thanks

Robert H.

I've installed LED tubes before and these look the same quality. I've not installed these particular ones yet but installation is very easy! Anticipate many years of use! Fast shipping, well packed, nothing broken!

Levi C.

Lit up my workspace better than expected

Ken K.

The blubs worked perfectly, and the instructions were clear. Would recommend to anyone .thnks for the good price also !

Denise C.

Came as expected. Price was the best I found.

wade s.

The LED lights were great price can’t be beat

Stephen O.

Easy to install and great light

Bob S.

I installed over 50 of these clear led tubes in two days. Wow what a upgrade from the old T12 bulbs in our office! So much brighter and cooler, I will be installing more in the near future.

Carl C.

Good prices and fast shipping. Allowed my experiment to stay on budget and lower operating cost.

frank o.

Easy to use

Questions & Answers

Ask a Question

Single ended power? One review wrote “remove ballast”, another said “when installed properly”. Should I be removing the ballast and run direct power(120v) to one end of the fixture. I’m all for it, I just want to clarify the correct way to install this light. .

Yes, for these you must first remove the ballast in your fixture, then wire these with Hot and Neutral on the same end, with a non-shunted tombstone at that wired end. The other end does not get wired or receive a tombstone. They can be wired at 120V, or anywhere 100-277V.
How are they packaged? Am concerned about damage upon delivery.

Each one comes in its own thicker paper tube, and they're packed very well since we never get complaints about these arriving damaged. It's the same with all our other polycarbonate-aluminum housing tubes.
Do they come with a wiring diagram?

We send it with installation instructions.