T8 8ft LED Tube/Bulb - 48W 6720 Lumens 5000K Clear, Single Pin, Double End Power - Ballast Bypass Fluorescent Replacement
T8 8ft LED Tube/Bulb - 48W 6720 Lumens 5000K Clear, Single Pin, Double End Power - Ballast Bypass Fluorescent Replacement
1pc
- Regular price
- CAD 50.58
- Sale price
- CAD 33.72
8ft LED Tube Light - 48W - Replace 170W Fluorescent tube - 5000K -T8 Clear - 6720 Lumens - FA8 Base - Single Pin Power
Our Double-Ended Power 8ft LED tube of 48W is available at 5000K color temperature (Daylight). This LED Tube having a CRI of >80 and it can deliver lumens up to 6720. This clear tube is an excellent substitute for T8, T10 & T12 fluorescent tubes. Our LED Tube can safely and easily replace a fluorescent tube of 170W and bring an energy-savings of 122W. Thus, a lower utility bill for you every month. Because this 48W LED tube is double-ended-power, it will work without a ballast. Hence the existing ballast must be bypassed and directly wired to the line source for the tube fixture to work. These 48W LED tubes are housed by rugged die-cast aluminum for efficient heat dissipation. To emit illumination from the high standard ceiling, these LED tubes having a beam angle of >120 degrees, releasing enough bright light. This light has a long lifespan and has a shatterproof coating. LED Tubes from LEDMyPlace are ETL & DLC listed and these listings make you eligible for a handsome rebate along with 5 years of warranty.
170
Watt Replacement
6720
Lumens
50,000
Hours
120°
Beam Angle
100-277
Volt
Features of 8ft LED Tube 48W 6720 Lumens Single Pin 5000K Clear:
- Color Temperature Available: 5000K
- Luminous Efficacy: 130-140 Lm/W
- Wattage Equivalent: 170W
- Lifespan: 50,000 hours
- Voltage: 100V - 277V
- Beam Angle: 120 Degrees
- Trim: Clear Cover
- Ballast Bypass [Works without a ballast]
- ETL, Listed
- 5 years of Manufacturer's Warranty
Ballast Bypass
This LED tube requires you to either remove the ballast or bypass it. We have prepared a step-by-step guide to help you bypass the ballast to successfully install your LED tube.
Flicker-Free
Whether it’s a 2ft, 4ft or 8ft LED tube, one of the jaw-dropping features of LED tubes is that they don’t flicker unlike what you would have definitely observed in the case of fluorescent tubes. The LED tubes start instantly and once they start, they don’t flicker and produce a humming sound.
IP22 Rated
The LED tubes that are clear have an IP22 rating. This rating signifies that our LED tubes are protected against dust-tight (objects in the dust that are of a size more than 1mm) and protected against water-ingress from all directions. For such reasons, LED tubes are safe for use in areas where there are moisture. E.g. Bathrooms, kitchens, etc.
Voltage Input
The LED tubes accept an input voltage of 100V-277V. You can go for a waterproof transformer in case you don’t have this voltage and wish to convert this voltage range to some other.
Low Maintenance Cost
The LED tubes will require low or no maintenance if you are going for a ballast bypass option of LED tube installation. Though not very frequent, you may have to replace the ballasts once in the total lifetime of LED tubes,
>50,000 Life Hours
The LED tubes will require low or no maintenance if you are going for a ballast bypass option of LED tube installation. Though not very frequent, you may have to replace the ballasts once in the total lifetime of LED tubes,
CRI >80
The CRI is greater than 80 for LED tubes, whatever object comes in the light distribution range appears to be real and natural up to 80% extent on a CRI scale of 1-100 and as it would have appeared in the natural light.
120 Degree Beam Angle
The 120 degrees or ultra-wide beam angle is made use of when large areas need to be covered. All our LED tubes whether clear have a 120-degree beam angle.
Energy Saving
The LED tubes can save energy up to 75% in extreme contrast with fluorescent tubes that consume a lot of energy to bring you a higher energy bill. We highly recommend going for our LED tubes that are an excellent combo of lumen brightness and energy-savings.
Aluminium Heat Sink
The LED tubes have a big heat sink made of aluminum and that’s a pretty good reason as to why the LED tubes don’t warm up too soon to be inconsistent operation. This is in extreme contrast with the fluorescent tubes that warmed up too soon and required cooling down to operate efficiently.
LED Chip
These LED lights are built with premium quality standalone chips (SMD LED) to provide high performance and reliability.
Specifications
| Base Type: | FA8 |
| Brand: | LEDMyplace |
| Color Rendering Index(CRI): | >80 CRI |
| Dimensions (L x W x H): | 93.81 x 1.15 x 1.32 |
| DLC Listed: | Yes |
| IP Rating: | IP22 Rated |
| Life Hours: | 50,000 Hours |
| Lumens: | 6720 Lumens |
| Operating Temprature: | -68 To +122 °F |
| Replaces: | 170 Watt Replacement |
| Voltage: | 100-277 Volt |
| Wattage: | 48 Watt |
| Beam Angle: | 120° Beam Angle |
| Certifications: | ETL, DLC, CE, RoHS |
| Color Temperature (Kelvin): | 5000 Kelvin |
| Dimmable: | No |
| Housing: | Aluminum + PC |
| LED Type: | 2835 |
| Light Distribution: | 130-140 Lm/W |
| MPN (Part No.): | TB014 |
| Power Factor: | >0.9 |
| SKU: | WEN-8FT-48W-FA8-5000K-C |
| Warranty: | 5 Years |
Product Review
Questions & Answers
Have a Question?
Be the first to ask a question about this.
