60 Watt LED Integrated Tube, T8 8 Feet - V Shaped, 210W Equivalent, 5000K Frosted, Linkable - Extendable Design - Basement Lighting
60 Watt V Shaped LED Integrated Tube, T8 8ft. 5000 Kelvin, 100-277V, 7200 Lumens - Frosted - LED Shop Lights
These 60W T8 LED integrated Tube fixtures come with a two-row clear finish with a CCT of 5000K. These light fixtures are designed to withstand and function in a voltage range of 100-277V. With a lumen output of 7200 Lumens, these tubes can easily replace 210W fluorescents. Comes with a lifespan of 50,000 hours and a manufacturer warranty of 5-years. A complete lighting fixture in itself these LED integrated tubes are practical, durable, and eco-friendly.
Features of 60 Watt V Shaped LED Integrated Tube, T8 8ft. 5000 Kelvin
- Available Wattage: 60W
- Available Color Temperature: 5000K
- Luminous Flux: 7200 Lumens
- Wattage Equivalent: 210W
- Lifespan - 50,000 hours
- Voltage: 100V - 277V
- Lens: Frosted
- ETL, DLC approved
- 5 years of Manufacturer's Warranty
Easy to Plug and Play
Like a fluorescent tube, this T8 8ft integrated tube doesn't require any ballast. The fluorescent tubes need the ballast to be removed, as it consumes lots of effort and time. Installing a new 8ft integrated tube is extremely easy if you compare it with retrofitting the fluorescent tube. Be relaxed with the T8 8ft integrated tube because all you have to do now is to lose the tube in its place and replace the starter.
The 8ft integrated tube offered by us is entirely flicker-free, as it operates without any starter, and this is why it is known to be a time-saving lighting product. You can blindly rely on it as your regular activity will not get disrupted at any cost.
The linkable integrated fixture T8 8ft LED Integrated tube can be linked directly using a linkable connector. You will get two white cables during installation for L or N and a yellow cable for the ground; you can use these wires also for connecting integrated tubes. By placing the clip kits and screws correctly, you can mount this fixture after aligning the tube to the ceiling or wall. Once after getting done with the tube's fixing part, you can connect the power cord to the tube. Power Cord sold separately.
These Integrated Tubes come with an IP40 rating ensuring protection against dust and water ingress. These tubes are safe to use for indoor lighting in bathrooms, kitchens, bedrooms, etc.
This T8 8ft LED integrated tube requires an input voltage of AC 100-277. This voltage range helps you wire the fixture directly without making any adjustments. The LED driver inside the tube will switch according to the incoming voltage for providing the current supply.
Low Maintenance Cost
This is a long-lasting fixture that lasts for 50,000 hours and with a very slight declination of Lumen till the end of its life, So there is very minimal or could say that almost negligible maintenance cost is required.
Colors pop, textures stand out, and its finishing has depth and luster when the CRI is high. Led Integrated Tube, with a CRI of 80+, which means that when you place a yellow-colored object under this light, it appears to be yellow. High CRI enables them to display the true colors of any object and space to 80% of its extent, making it suitable for different applications.
Wide Beam Angle
A width of a light produced from the luminaire is beam angle. The integrated tube fixtures have a wide beam angle of 180 degrees that scatter light on the broader area for general area lighting and lighting up the vast areas. It is perfect to be installed in a space where there is low ceiling indoor space.
It's not just the technology that gets people excited; it's also how much energy the product uses. You can easily save more than 75% energy by installing LED Integrated tubes if compared to the fluorescent tube, so hurry up and install this energy-efficient integrated fixture.
Aluminum Heat Sink
With an aluminum heat sink, these lights are built to resist heat while producing optimal lighting. Aluminum being a conductor, can efficiently and effectively dissipate heat in comparison to other materials.
Premium LED Chips
We never sacrifice quality, which is why we go to great lengths to make our products more dependable. The use of Epistar LED chips in LED integrated tubes improves the effectiveness of this LED fixture.
>50,000 Life Hours
It is a build-up to last for more than 50,000 hours.
These LED Integrated Tubes can operate in temperatures ranging between -4°F to 104°F which is -20°C to 40°C. This LED fixture performs outstandingly in these temperatures.
|Color Rendering Index(CRI):||>80 CRI|
|Damp Location:||Damp Location|
|Operating Temprature:||-4°F to 104°F|
|Replaces:||210 Watt Replacement|
|Beam Angle:||180° Beam Angle|
|Certifications:||ETL, DLC Listed|
|Color Temperature (Kelvin):||5000 Kelvin|
|Dimensions (L x W x H):||94.80''x1.22''x1.46''|
|IP Rating:||IP40 Rated|
|Life Hours:||50,000 Hours|
|MPN (Part No.):||IT001|
|Safety Rating:||ETL, DLC Listed|
Questions & AnswersAsk a Question
can these survive -30 outside temps
No, the max temp they're rated for is -4 degrees Fahrenheit.
Are they dimmable?
These aren't dimmable.